Kriechbeständig

Kriechen in Materialien

Kriechbeständig

Kriechbeständige Materialien zeichnen sich durch ihre Fähigkeit aus, auch unter langanhaltender Belastung und hohen Temperaturen stabile Dimensionen beizubehalten. Dies macht sie besonders wertvoll für Anwendungen, bei denen eine starke mechanische Beanspruchung über lange Zeiträume erfolgt.

Verwandte Tags

Neues

Effect of laser surface remelting of the Ni-base superalloy Haynes 282

Athira, K.S. (Speaker)¹; Chatterjee, S.¹; Muvvala, G.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Additive manufactured multi-phase V-Si-B alloys for high-temperature application

Schmelzer, J. (Speaker)¹; Rittinghaus, S.-K.²

FEMS EUROMAT 2023

Abnormal grain growth to achieve resource-saving and creep-resistant ferritic oxide-dispersion-strengthened high-temperature alloys

Mayer, M. (Speaker)¹; Bártková, D.²; Ressel, G.¹; Svoboda, J.²

Mechanical properties of cast and additively manufactured NiAl-CrMo in-situ composites

Vollhüter, J. (Speaker)¹; Titz, K.¹; Wahlmann, B.¹; Körner, C.¹; Neumeier, S.¹; Göken, M.¹

ACHIEF project: towards high performance alloys and coatings to enhance efficiency in harsh applications

Boidot, M. (Speaker)¹; Baffie, T.¹; Rey Rodriguez, P.²; Andersson, T.³; Açıksarı, C.⁴; Oğuz, O.⁴; Viat, A.⁵; Cornu, J.⁵; Menet, P.-Y.⁵; Barbero Arribas, J.I.⁶; Callejo Piedra, L.M.⁶; Aleman, R.⁷; Mendez Alva, F.⁷; Cascone, F.D.⁸; Pohlkötter, A.⁹; Barco Atutxa, J.¹°; Basterretxea Maruri, I.¹¹

Improving the thermomechanical properties of oxide ceramic reinforcing Fibres for high-temperature applications by means of doping, seeding and sintering additives

Glaser, L. (Speaker)¹

Manufacturing processes of composite powders for AM of ODS materials

Elsayed, A. (Speaker)¹; Brasche, F.¹; Šulák, I.²; Fischer-Buehner, J.³; Adolfsson, E.⁴; Nowak, B.⁵; Haase, C.⁶; Krupp, U.¹

Herstellung, Eigenschaften und Potentiale von Mg-Nanokompositen

Dieringa, H. (V)¹

Verbundwerkstoffe - 24. Symposium Verbundwerkstoffe und Werkstoffverbunde

Highlight Lecture

Development of novel chromium-based superalloys for advanced concentrated solar power

Ma, K. (Speaker)¹; Blackburn, T.¹; Hernández, R.²; Kerbstadt, M.³; Onorbe, E.²; Navas, M.²; Galetz, M.³; Knowles, A.¹

FEMS EUROMAT 2023

Quantitative analysis of boron enrichment into M23C6 precipitates after tempering and creep in modified 9Cr-1Mo steel using 3D APT

Sathyanadhan, S. (Speaker)¹; Das, C.R.²; Kar, S.K.¹

FEMS EUROMAT 2023

Beliebt

ACHIEF project: towards high performance alloys and coatings to enhance efficiency in harsh applications

Boidot, M. (Speaker)¹; Baffie, T.¹; Rey Rodriguez, P.²; Andersson, T.³; Açıksarı, C.⁴; Oğuz, O.⁴; Viat, A.⁵; Cornu, J.⁵; Menet, P.-Y.⁵; Barbero Arribas, J.I.⁶; Callejo Piedra, L.M.⁶; Aleman, R.⁷; Mendez Alva, F.⁷; Cascone, F.D.⁸; Pohlkötter, A.⁹; Barco Atutxa, J.¹°; Basterretxea Maruri, I.¹¹

Refractory based high entropy alloys for high temperature applications

Neubauer, E. (V)¹; Biermair, F.²; Kitzmantel, M.¹; Kovacova, Z.¹; Ressel, G.²

3. Fachtagung Werkstoffe und Additive Fertigung

Nanostructured NiAl-Cr(Mo) in-situ composites processed by selective electron beam melting

Vollhüter, J. (Speaker)¹; Förner, A.¹; Göken, M.¹; Jamjoom, A.¹; Körner, C.¹; Neumeier, S.¹

Research on the development of aluminium alloys for automotive cables

Smyrak, B. (Speaker)¹; Jalowy, P.¹; Knych, T.¹; Korzeń, K.¹; Leszczyńska-Madej, B.¹; Mamala, A.¹; Zasadzińska, M.¹

Microstructure evolution during directional solidification of NiAl-(Mo,Cr) eutectics and its impact on creep response

Heilmaier, M. (Speaker)¹; Böhlke, T.²; Kauffmann, A.²; Kellner, M.²; Laube, S.²; Nestler, B.²; Schneider, M.²; Schulz, C.²; Wicht, D.²

Microstructure-oriented crack growth in as-cast Mg-6Al-3Ba-3Ca alloy (DieMag633) under tension, compression and fatigue

Maier, P. (Speaker)¹; Clausius, B.¹; Ginesta, D.¹; Hort, N.²

Deformation mechanisms rationalisation to design for creep resistance in polycrystalline Ni-based superalloys

Barba, D. (Speaker)¹; Egan, A.²; Gong, Y.³; Mazanova, V.²; Mills, M.J.²; Reed, R.C.¹; Tang, Y.¹; Utada, S.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Highlight Lecture

Development of novel chromium-based superalloys for advanced concentrated solar power

Ma, K. (Speaker)¹; Blackburn, T.¹; Hernández, R.²; Kerbstadt, M.³; Onorbe, E.²; Navas, M.²; Galetz, M.³; Knowles, A.¹

FEMS EUROMAT 2023

Improving the thermomechanical properties of oxide ceramic reinforcing Fibres for high-temperature applications by means of doping, seeding and sintering additives

Glaser, L. (Speaker)¹

Low-cost additive manufacturing of superalloys using fused filament fabrication

Felfer, P. (Speaker)¹; Gonzalez-Garcia, J.²; Kukla, C.³; Meermeier, A.¹; Neumeier, S.¹; Thompson, Y.¹; Zissel, K.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Design and creep of a new polycrystalline Ni-base superalloy

Hunfeld, J. (Speaker)¹; Eggeler, G.¹; Kiese, J.²; Kostka, A.¹; Laplanche, G.¹; Li, T.¹; Sommer, H.¹; Somsen, C.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Keynote Lecture

Microstructure Evolution and Mechanical Properties of α′/α″-Strengthened Ferritic Superalloys

Zenk, C.H. (Speaker)¹; Bezold, A.²; Förner, A.²; Körner, C.²; Morales, L.²; Neumeier, S.²

Mechanical properties of cast and additively manufactured NiAl-CrMo in-situ composites

Vollhüter, J. (Speaker)¹; Titz, K.¹; Wahlmann, B.¹; Körner, C.¹; Neumeier, S.¹; Göken, M.¹

Additive manufacturing of multi-phase V-Si-B alloys for high temperature application

Schmelzer, J. (Speaker)¹; Krüger, M.²; Rittinghaus, S.-K.³

ICME-guided design of novel ODS alloys for additive manufacturing of high temperature devices for aggressive environments

Brasche, F. (Speaker)¹; Berglund, I.²; Haase, C.¹; Krupp, U.¹; Pandian, V.¹; Walbrühl, M.²; Yan, F.²

Abnormal grain growth to achieve resource-saving and creep-resistant ferritic oxide-dispersion-strengthened high-temperature alloys

Mayer, M. (Speaker)¹; Bártková, D.²; Ressel, G.¹; Svoboda, J.²

Quantitative analysis of boron enrichment into M23C6 precipitates after tempering and creep in modified 9Cr-1Mo steel using 3D APT

Sathyanadhan, S. (Speaker)¹; Das, C.R.²; Kar, S.K.¹

FEMS EUROMAT 2023

Manufacturing processes of composite powders for AM of ODS materials

Elsayed, A. (Speaker)¹; Brasche, F.¹; Šulák, I.²; Fischer-Buehner, J.³; Adolfsson, E.⁴; Nowak, B.⁵; Haase, C.⁶; Krupp, U.¹

Effect of laser surface remelting of the Ni-base superalloy Haynes 282

Athira, K.S. (Speaker)¹; Chatterjee, S.¹; Muvvala, G.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Herstellung, Eigenschaften und Potentiale von Mg-Nanokompositen

Dieringa, H. (V)¹

Verbundwerkstoffe - 24. Symposium Verbundwerkstoffe und Werkstoffverbunde

© 2025