Laserbearbeitung

Laser in der Werkstoffbearbeitung und -charakterisierung

Laserbearbeitung

Laserbearbeitung nutzt fokussierte kohärente Strahlung zur lokalen Energieeinbringung in Werkstoffe. Abhängig von Leistungsdichte und Wechselwirkungszeit erfolgen Erwärmung, Schmelzen, Verdampfen oder Strukturmodifikation. Anwendungen umfassen Schneiden, Schweißen, Oberflächenhärten, Strukturieren und Additive Fertigung. Mikrostrukturelle Effekte wie Gefügeumwandlungen, Rissbildung oder Eigenspannungen ergeben sich aus extremen Temperaturgradienten und Abkühlraten.

Verwandte Tags

Funktionalisierung von Oberflächen mittels Mikro/Nano Strukturierungsverfahren

Fertigung und Produktionstechnik

Direkte Laserinterferenzstrukturierung

Oberflächenfunktionalisierung

Femtosekundenlaser

Gepulste Laserablation

Laserinduzierte periodische Oberflächenstrukturen

superhydrophobe Oberfläche

nichtmetallische anorganische Werkstoffe

Prozess- & Fertigungstechnologien

metallische Werkstoffe

Oberflächenstrukturierung

Pulverbettfusion

selektives Laserschmelzen

Oberflächentexturierung

Lasertexturierung

metallische Gläser

Oberflächentopographien

Prozessparameter

Oberflächenstrukturen

gerichtete Energieablage

Kornverfeinerung

Mikrostrukturanalyse

Femtosekunden-Laserstrukturierung

Oberflächenrauheit

Oberflächenbenetzbarkeit

Konfokalmikroskopie

Neue Inhalte

Comparison of LIPSS structures generation on plastic parts by direct laser texturing and injection molding

Concheso, C. (Speaker)¹; Peña, J.I.²; Sola, D.³

FEMS EUROMAT 2023

Innovative Polymer Coating Systems for the Amplification of Energy Efficiency and Sustainability of Components

Guetse Dongmo, L. (V)¹; Buling, A.²; Zerrer, J.²

MaterialsWeek 2021

On the laser-based fabrication of gradient periodic surface structures at low energy levels and the induced metallurgical effects

Wu, T. (Speaker)¹; Voisiat, B.¹; Soldera, F.²; Soldera, M.¹; Lasagni, A.F.¹

FEMS EUROMAT 2023

A non-equilibrium state of grain boundaries in additively manufactured CoCrFeMnNi high-entropy alloy

Choi, N. (V)¹; Choe, J.²; Divinski, S.¹; Kottke, J.¹; Kulitckii, V.¹; Lee, J.S.³; Park, J.H.³; Tas, B.¹; Wilde, G.¹; Yang, S.²; Yu, J.H.²

MaterialsWeek 2021

AI-Testbech: Data collection for AI algorithms in laser surface structuring

Steege, T. (Speaker)¹; Lull, F.¹; Stegert, A.¹; Schöps, P.¹; Zwahr, C.¹; Franke, V.¹; Klotzbach, U.²; Lasagni, A.F.³

Laser Precision Microfabrication (LPM) 2022

Poster - Young Scientist Poster

Quality and flexural strength of laser-cut glass

Mackevičiūtė, M. (Speaker)¹; Daknys, E.²; Dudutis, J.²; Gečys, P.²; Gvozdaitė, R.²; Markauskas, E.²; Račiukaitis, G.²; Zubauskas, L.²

Laser Precision Microfabrication (LPM) 2022

Selective Laser Melting of Pure Copper (Cu-ETP)

Miah, K.U.M. (Speaker)¹; Kloshek, A.¹; Ossenbrink, R.¹; Seidlitz, H.²

4th Symposium on Materials and Additive Manufacturing

Design of gradient structured materials by laser processing of amorphous metal alloys

Nykyruy, Y.¹; Mudry, S.¹; Plevachuk, Y. (Speaker)¹

FEMS EUROMAT 2023

Lightweight with Unknown Potential – How PEO Ultraceramic®, Tailored Polymers and Laser Light enable Amazing Applications

Buling, A. (Speaker)¹

Femtosecond laser texturing of solder glass-zirconia double-layer substrates for dental applications

Hartung, F. (Speaker)¹

Beliebte Inhalte

Plenary lecture

Hybrid Laser Precision Engineering of Transparent Hard Materials: Challenges, Solutions and Applications

Minghui, H. (Speaker)¹

Laser Precision Microfabrication (LPM) 2022

Comparison of LIPSS structures generation on plastic parts by direct laser texturing and injection molding

Concheso, C. (Speaker)¹; Peña, J.I.²; Sola, D.³

FEMS EUROMAT 2023

Large area functionalisation of surfaces using Direct Laser Interference Patterning

Lasagni, A.F. (Speaker)¹; Baumann, R.²; Nitschke, L.³; Ränke, F.²; Serey, N.³; Soldera, M.²; Voisiat, B.²; Zwahr, C.³

Eröffnung der 56. Metallographie-Tagung

Mücklich, F.¹

56. Metallographie-Tagung 2022 - Materialographie

The influence of excited electromagnetic modes and hydrodynamic effects in processing with ultrashort laser pulses

Fraggelakis, F. (Speaker)¹; Lingos, P.¹; Maragkaki, S.¹; Stratakis, E.¹; Tsibidis, G.¹

Laser Precision Microfabrication (LPM) 2022

Innovative Polymer Coating Systems for the Amplification of Energy Efficiency and Sustainability of Components

Guetse Dongmo, L. (V)¹; Buling, A.²; Zerrer, J.²

MaterialsWeek 2021

Implementing Multi-Criteria Life Cycle Analyses for the Eco-Design, Material Substitution and Material Efficiency of a Digitalised Laser Based Surface-Functionalisation Process of Complex Shaped Parts

Walls, C.¹; Lasagni, A.F.²; Beck, G. (Speaker)¹

Development of β-phase strengthened Titanium alloy to achieve improved strength and ductility via laser processing

Mohanty, I. (Speaker)¹; Misra, S.¹; Kar, S.K.¹; Saha, P.¹

FEMS EUROMAT 2023

On the laser-based fabrication of gradient periodic surface structures at low energy levels and the induced metallurgical effects

Wu, T. (Speaker)¹; Voisiat, B.¹; Soldera, F.²; Soldera, M.¹; Lasagni, A.F.¹

FEMS EUROMAT 2023

A non-equilibrium state of grain boundaries in additively manufactured CoCrFeMnNi high-entropy alloy

Choi, N. (V)¹; Choe, J.²; Divinski, S.¹; Kottke, J.¹; Kulitckii, V.¹; Lee, J.S.³; Park, J.H.³; Tas, B.¹; Wilde, G.¹; Yang, S.²; Yu, J.H.²

MaterialsWeek 2021

Long-term performance and durability of laser-manufactured functional surfaces

Zschach, L.G. (Speaker)¹; Ränke, F.¹; Tabares, I.¹; Baumann, R.¹; Soldera, M.¹; Lasagni, A.F.¹

MaterialsWeek 2025

Hochdurchsatz-Methode für die Entwicklung neuer Materialkombinationen in der laserbasierten Additiven Fertigung von Wolframkarbid-Verbundwerkstoffen

Schubert, T. (V)¹; Bernthaler, T.¹; Schneider, G.¹; Wengenmayr, E.¹

3. Fachtagung Werkstoffe und Additive Fertigung

AI-Testbech: Data collection for AI algorithms in laser surface structuring

Steege, T. (Speaker)¹; Lull, F.¹; Stegert, A.¹; Schöps, P.¹; Zwahr, C.¹; Franke, V.¹; Klotzbach, U.²; Lasagni, A.F.³

Laser Precision Microfabrication (LPM) 2022

High power water jet guided laser cutting of SiC/SiC ceramic matrix composite

Elkington, H. (Speaker)¹; Marimuthu, S.¹; Smith, B.¹

Laser Precision Microfabrication (LPM) 2022

Processing of eutectic Al2O3-ZrO2-mixtures for multi-material and hybrid additive manufacturing using powder bed fusion of metals using laserbeam

Singer, C. (Speaker)¹

FEMS EUROMAT 2023

Enhancing the long-time stability of copper-coated carbon fibre-reinforced plastics using pulsed laser-based processing approaches

Gebauer, J. (Speaker)¹; Lasagni, A.F.²

Laser Precision Microfabrication (LPM) 2022

Bioinspired femtosecond laser textured surfaces for long-term super-hydrophobic properties

VALETTE, S. (Speaker)¹; BASSET, S.¹; BENAYOUN, S.¹; HEISBOURG, G.²; Pascale-Hamri, A.³

Laser Precision Microfabrication (LPM) 2022

Improvement of friction anisotropy of CVT pulley/belt by surface texture

Harada, A. (Speaker)¹; Sasaki, S.²; Watanabe, S.²

Friction 2021 - European Symposium on Friction, Wear and Wear Protection

Poster - Young Scientist Poster

Quality and flexural strength of laser-cut glass

Mackevičiūtė, M. (Speaker)¹; Daknys, E.²; Dudutis, J.²; Gečys, P.²; Gvozdaitė, R.²; Markauskas, E.²; Račiukaitis, G.²; Zubauskas, L.²

Laser Precision Microfabrication (LPM) 2022

Deterministic processing of alumina with nanosecond laser pulses for energy applications

Feng, J. (Speaker)¹; Herrmann, M.¹; Reinecke, A.-M.¹; Hurtado, A.¹

FEMS EUROMAT 2023

Micromachining of transparent materials by GHz burst mode laser induced plasma assisted ablation (GHz burst-LIPAA)

Obata, K. (Speaker)¹; Hanada, Y.²; Kawabata, S.³; Miyaji, G.⁴; Sugioka, K.¹

Laser Precision Microfabrication (LPM) 2022

Electron backscatter diffraction (EBSD) mapping of solidification grains, micro-twins, and building texture during laser additive manufacturing

Khodabakhshi, F. (Speaker)¹; Gerlich, A.P.²; Mohammadi, M.³; Wilde, G.⁴

4th Symposium on Materials and Additive Manufacturing

Cost efficient production of superhydrophobic surfaces by injection molding of laser-generated stochastic structures

Wienke, A. (Speaker)¹; Düsing, J.¹; Brunotte, G.-P.²; Koch, J.¹; Jäschke, P.¹; Ternka, M.²; Overmeyer, L.¹; Kaierle, S.¹

FEMS EUROMAT 2023

Selective Laser Melting of Pure Copper (Cu-ETP)

Miah, K.U.M. (Speaker)¹; Kloshek, A.¹; Ossenbrink, R.¹; Seidlitz, H.²

4th Symposium on Materials and Additive Manufacturing

Innovative Robot Integration and Process Monitoring in Direct Laser Interference Patterning

Olawsky, L. (Speaker)¹; Li, D.²; Kuhn, C.¹; Du, K.²; Lasagni, A.F.³

In-situ Alloying of NiAl-based Intermetallic Compounds by means of Laser based Direct Energy Deposition with Blown Powder

Lòpez, E. (V)¹; Brueckner, F.¹; Leyens, C.¹; Müller, M.²; Riede, M.¹

3. Fachtagung Werkstoffe und Additive Fertigung

Influence of microstructural gradation on the fatigue crack growth behavior of AISI 316L manufactured by laser-based powder bed fusion

Möller, N. (Speaker)¹; Niendorf, T.¹; Richter, J.¹; Wegener, T.¹

Capturing the effects of microstructure and interfaces in engineering materials using large-scale atomistic simulations

Ganesan, H. (Speaker)¹; Sandfeld, S.¹

Design of gradient structured materials by laser processing of amorphous metal alloys

Nykyruy, Y.¹; Mudry, S.¹; Plevachuk, Y. (Speaker)¹

FEMS EUROMAT 2023

Lightweight with Unknown Potential – How PEO Ultraceramic®, Tailored Polymers and Laser Light enable Amazing Applications

Buling, A. (Speaker)¹

© 2026