Finite Elemente Analysen

Analyse in der Materialwissenschaft

Finite Elemente Analysen

Finite Elemente Analysen nutzen numerische Modelle zur Simulation des mechanischen und thermischen Verhaltens von Werkstoffen. Durch die Aufteilung in kleine Elemente lassen sich komplexe Belastungsszenarien und interagierende Effekte präzise untersuchen.

Verwandte Tags

Neues

Prediction of Forming Behavior of Ti-6Al-4V Alloy by Finite Element Analysis

Aydın, M. (Speaker)¹; DİLMEÇ, M.²; HALKACI, H.S.¹; KORKMAZ, H.G.³; LİVATYALI, H.⁴; TOROS, S.³; TÜRKÖZ, M.¹; Öztürk, O.¹

Investigation of the manufacturing-related residual stresses in PBF-LB components and their consideration in the topology optimization for the virtual test bench for additive manufacturing - CAEaddFert

Lenhardt, S. (Speaker)¹; Krämer, C.²; Dannecker, R.³; Meier, A.⁴; Albers, A.¹; Dietrich, S.²

A Study on the Finite Element Analysis of the connections of the Glued-in-rod of Wooden Buildings

Heo, Y. (Speaker)¹; Oh, K.²; Hwang, K.¹; Lim, H.-w.¹; Jang, D.¹; Lee, K.¹

FEMS EUROMAT 2023

Numerical implementation of thermoset curing effect

Luger, M. (Speaker)¹; Dalbauer, V.¹; Kölbl, S.¹

FEMS EUROMAT 2023

CFRP reinforcements of 3D printed hollow aluminum struts for potentially load-bearing lightweight pressure vessels

Motsch-Eichmann, N. (Speaker)¹; Luengo Scotto, R.²; Toenjes, A.³

6th Hybrid Materials and Structures 2025 - International Conference on Hybrid Materials

Poster-Pitch-Presentation

Porosity ratio dependence of hydrogen diffusivity in additive manufactured 17-4 PH stainless steels

Arakaki, M. (Speaker)¹; Kato, S.¹; Morishita, K.²; Yamabe, J.¹

1st Conference on Hydrogen in Materials Science and Engineering - H2 MSE

AI Based Lifetime Prediction of LEDs using Convolutional Neural Network

Akhtar, M.Z. (Speaker)¹

Conference on Artificial Intelligence in Materials Science and Engineering - AI MSE 2023

Materials in Hydrogen Containing Environments

Mahmood, S. (Speaker)¹; Ouinten, M.L.¹; Satouri, S.¹

Analytical and numerical global buckling analysis of sandwich structures with different lattice cores

Osmanoglu, S. (Speaker)¹; Mittelstedt, C.¹

Nonlinear electro-elastic finite element analysis with neural network constitutive models

Klein, D.K. (Speaker)¹; Ortigosa, R.²; Hossain, M.³; Weeger, O.¹

Beliebt

Best of Schadensanalyse an Turbo-maschinen – die Highlights aus 20 Jahren Laborpraxis

A. Neidel, E. Cagliyan, T. Gädicke, M. Giller, V. Hartanto, C....

Effect of the stress state on deformation-induced austenite to martensite transformation in medium-Mn steels

Carreno-Saavedra, J. (Speaker)¹

FEMS EUROMAT 2023

Stiffness-oriented Optimization of Material Distribution in Multi-Material Components

Lehmhus, D. (Speaker)¹; Bosse, S.²; Mounchili, A.P.³; Struss, A.¹

FEMS EUROMAT 2023

Structural-mechanical optimization of printing paths in 3D printing using Fused Filament Fabrication (FFF)

Schiele, A. (Speaker)¹; Bethge, K.¹; Greiner, C.¹; Tesari, I.¹

Bioinspired and tuneable strain-stiffening structures for biomedical applications

Schmidt, M. (Speaker)¹; Kadem, L.¹; Selhuber-Unkel, C.¹; Taale, M.¹; Timmermann, M.²

6th Bioinspired Materials 2022

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Sudmanns, M. (Speaker)¹; Birnbaum, A.²; Callahan, P.²; El-Awady, J.¹; Gu, Y.¹; Iliopoulos, A.²; Michopoulos, J.²

Anisotropic fatigue crack growth in IN718 processed by laser power bed fusion

Maurel, V. (Speaker)¹; Prost, M.¹; Missoum Benziane, D.¹; Depinoy, S.¹; Ferhat, L.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Analytical and numerical global buckling analysis of sandwich structures with different lattice cores

Osmanoglu, S. (Speaker)¹; Mittelstedt, C.¹

Effect of thermal-expansion mismatch on thermomechanical behaviours of CGI

Cao, M. (Speaker)¹; Baxevanakis, K.P.¹; Silberschmidt, V.V.¹

FEMS EUROMAT 2023

Combined qualitative and quantitative analysis on the damage tolerant fatigue behavior of LMCs with dissimilar yield strength using in situ far-field microscopy

Pohl, P. (Speaker)¹; Göken, M.¹; Höppel, H.W.¹; Matschkal, D.¹

Prediction of Forming Behavior of Ti-6Al-4V Alloy by Finite Element Analysis

Aydın, M. (Speaker)¹; DİLMEÇ, M.²; HALKACI, H.S.¹; KORKMAZ, H.G.³; LİVATYALI, H.⁴; TOROS, S.³; TÜRKÖZ, M.¹; Öztürk, O.¹

Large Deformations of Metal Foams: Dynamic CT Results, Simulations and Modeling

Hümbert, M. (Speaker)¹; De Boever, W.²; Glatt, E.¹; Grießer, A.¹; Grimm-Strele, H.³; Hunter, L.⁴; Kabel, M.³; Rief, S.¹

Evaluation of the strain field induced by iron inclusions in a cast Al-alloy using correlated microscopy

Brückner-Foit, A. (Speaker)¹; Fehlbier, M.¹; Ickler, T.¹; Juengst, D.¹; Zeismann, F.¹

Highlight Lecture

Studying interface fracture of SiC composites locally using novel micromechanical specimens

Ast, J.¹; Tian, C.²; Herre, P.³; Rohbeck, N.²; Michler, J.²; Christiansen, S.¹; Schwiedrzik, J. (Speaker)⁴

FEMS EUROMAT 2023

Numerical toolbox for digitalization of the binder-based PM production route from powder to component

Deng, Y. (V)¹; Broeckmann, C.¹; Kaletsch, A.¹; Rajaei, A.²

3. Fachtagung Werkstoffe und Additive Fertigung

Lightweight design and resource conservation potentials for die cast components

Rohrer, M. (Speaker)¹; Beeh, E.¹; Piazza, G.¹

Investigation of the manufacturing-related residual stresses in PBF-LB components and their consideration in the topology optimization for the virtual test bench for additive manufacturing - CAEaddFert

Lenhardt, S. (Speaker)¹; Krämer, C.²; Dannecker, R.³; Meier, A.⁴; Albers, A.¹; Dietrich, S.²

Structural integrity at elevated temperature assessment of solid particles for concentrated solar power systems using ICME approach

Biswas, A. (Speaker)¹; Andersson, T.²; Benameur, N.³; Laukkanen, A.²; Lindroos, M.²; Marlin, S.³; Pinomaa, T.²; Vajragupta, N.²

FEMS EUROMAT 2023

Computational study of a ceramic-titanium material compound for hybrid knee endoprosthesis

Sass, J.-O. (Speaker)¹; Bader, R.¹; Ganz, C.²; Lembke, U.³; Vogel, D.¹

5th Hybrid Materials and Structures 2022 - International Conference on Hybrid Materials

Materials in Hydrogen Containing Environments

Mahmood, S. (Speaker)¹; Ouinten, M.L.¹; Satouri, S.¹

Numerical exploration on the thermal response of metallic Primitive-Schwarz lattice/organic PCMs composites

Molteni, M. (Speaker)¹; Candidori, S.¹; Gariboldi, E.¹; Graziosi, S.¹

FEMS EUROMAT 2023

Ways to robust Part Designs for Additively Manufactured Sinter Parts through Lightweight Design Techniques

Stachg, D. (Speaker)¹; Marter, T.²; Telgkamp, J.¹

Plesio-Bricks: Space-filling Shapes for Topological Interlocking in Volumetric Domains

Krishnamurthy, V. (Speaker)¹; Akleman, E.¹; Ebert, M.¹; Estrin, Y.²

Oral-Poster-Presentation

Transformation in Residual Stress Field due to Substrate Change during Multi track Deposition of IN718 Superalloy

Kumar, B. (Speaker)¹; Balila, N.J.¹; Sahu, S.¹

EuroSuperalloys 2022 - 4th European Symposium on Superalloys and their Applications

Keynote Lecture

Mechanics and design of topologically interlocked irregular quadrilateral tessellations

Siegmund, T. (Speaker)¹; Kim, D.Y.²

The effect of process parameters on the residual stresses in additive manufactrued superalloys

Fisk, M. (Speaker)¹

FEMS EUROMAT 2023

Poster-Pitch-Presentation

Porosity ratio dependence of hydrogen diffusivity in additive manufactured 17-4 PH stainless steels

Arakaki, M. (Speaker)¹; Kato, S.¹; Morishita, K.²; Yamabe, J.¹

1st Conference on Hydrogen in Materials Science and Engineering - H2 MSE

A Study on the Finite Element Analysis of the connections of the Glued-in-rod of Wooden Buildings

Heo, Y. (Speaker)¹; Oh, K.²; Hwang, K.¹; Lim, H.-w.¹; Jang, D.¹; Lee, K.¹

FEMS EUROMAT 2023

Integrated Computational Materials Engineering (ICME) for Development of Electric Contacts for Mg-Si-based Thermoelectric Devices

Tumminello, S. (Speaker)¹; Fries, S.G.²; Bartsch, M.¹; Müller, E.¹; De Boor, J.¹

The lightweight potential of anisotropic plate lattice structures

Maier, M. (Speaker)¹; Stangl, C.¹; Saage, H.¹; Huber, O.¹

4th Symposium on Materials and Additive Manufacturing

© 2025